Requirements IG60 A Sentrius™ IG60-BL654 - Greengrass Build 3x dipole antennas (comes with IG60-BL654) AC Power supply (comes with IG60-BL654) BT610 One or more BT610 sensors. Some type of sensor/cable assembly to plug into the BT610. Mobile App You’ll need the following apps on your mobile device. IG Connect app INSERT ICONS FOR APP STORE AND PLAY STORE WITH LINKS TO THE APP BT610 app INSERT ICONS FOR APP STORE AND PLAY STORE WITH LINKS TO THE APP Network Ports It is possible that your network and firewall may prevent some outgoing connections to AWS IoT Greengrass and subsequently Laird’s Bluegrass Demo instance. Please make sure these ports are open for outgoing connections. 443 8443 (outbound, HTTPS) 8883 (outbound, MQTT) You an use a website called Port Quiz to test if these ports are open. If the page does not open or fails to load then you’ll need to open these ports yourself or request your IT department to open them for you. http://portquiz.net:443/ http://portquiz.net:8443/ http://portquiz.net:8883/ Bluegrass account For this demo you’ll be using Laird’s Bluegrass demo platform which is built on top of AWS. This Bluegrass platform provides a web interface to manage your devices and to visualize your sensor data that is being sent up to the cloud via the gateway. In the next page of this guide you’ll create a Bluegrass account and register your gateway device.
