The 6G band uses channel numbers that span the 2G and 5G channel sets and beyond. All test commands require the channel number as a parameter so it is necessary to specify whether the channel number is 2G/5G or 6G if the radio supports the 6G band. The lru does this via a Test Mode configuration option that indicates how channel numbers should be interpreted. The lru interprets the channel number parameter specified for each test based on the Test Mode configuration currently in effect.

Note: The Test Mode configuration is only available when the Sona IF573 is present.

The configuration menu is entered using the cfg command.

lru :>cfg
WiFi Configuration Menu:
    Domain:             FCC
    Test mode:          2.4G/5G
cfg :>?
Configuration menu
options:
	-d        [FCC | IC | ETSI | JP | AU | NZ]              -> Set Domain
	-m/--mode [2g5g | 6g]                                   -> Test mode (2.4/5G vs 6G)
	 x                                                      -> Return to previous menu

WiFi Configuration Menu:
    Domain:             FCC
    Test mode:          2.4G/5G
cfg :>

Note: The set of available configuration options varies depending on the underlying radio.

To set the test mode, use the -m command. If the setting is successful the lru will reflect the new setting in its status and help commands. Use x to return to the previous menu.